FAQ

How Your Rings Are Made?

Our rings are handcrafted with love and perfection. Each uniquely customized ring goes through a meticulous process before it reaches you. The process begins with raw and the purest form of titanium (99.9%), unmixed with any alloys and molded into the shape of the ring, based on the size that you have provided. The raw titanium ring undergoes a process of polishing with a chiseling tool, allowing the ring to gain a homogeneous size, chiseling off any uneven surfaces. Soon after, the ring is smoothed with a polishing tool ensuring that the ring is smooth and shiny in its appearance and texture. A polishing material is then dusted onto the ring and it is cleaned and brushed. When the ring is cleaned, the ring is dipped into a water and electrolyte solution, and with the help of AC/DC voltage/electricity, an electric current allows the titanium ring to become anodized, giving it a natural color. The higher the voltage, the thicker the oxide layer; this allows light to bend differently, altering the natural colors that are produced. Different voltage levels produce different colors, giving us the opportunity for creativity and personalization. Depending on the customer’s requirements, the titanium can be anodized into a myriad of amazing colors: blue, gold, bronze, etc. The colors never fade because the color is part of the titanium itself. Now the ring is ready! Should you wish to have an engraving, the ring is put into an engraving machine ready for your design. The customized pattern is designed using special software, meaning no two designs will ever be the same. The inside of the ring band is now engraved with your message. The band is then polished and is ready to be worn: an exquisite ring, one of a kind.

How do I order?

Whatever the stage of your journey, should you have a detailed vision of your ideal ring  or just a few initial ideas, we are here to answer your questions. Should you simply wish to find out more, no matter what the question, we would be happy to help. If you are ready to order you may click on any of our standard rings, choosing the correct size (men or women), then click 'add to cart’. Finally, click ‘checkout’ to finalize your purchase. For bespoke ring orders please click on ‘contact’ at the bottom of the page to discuss your requirements with us further – we look forward to hearing from you.

How to get your finger print?
Step 1: With a pencil, scribble a square a little bigger than your thumbprint. Make sure it is clearly outlined.
Step 2: Rub your finger on the square until your whole thumbprint is covered in the lead.
Step 3: Put your finger on the Sellotape until your print appears.
Step 4: Stick the tape on a piece of white paper.
Step 5: Send us a clear image

Fingerprint limitations
1) The width of ring must be greater than 4mm in width.
2) The engraving on the ring will only capture part of your fingerprint.